IC-M510E VHF Marine Radio with WLAN
IC-M510E VHF Marine Radio with WLAN
IC-M510E VHF Marine Radio with WLAN
IC-M510E VHF Marine Radio with WLAN

IC-M510E VHF Marine Radio with WLAN

No reviews yet
Part Number:

Class-D DSC VHF Marine Radio with WLAN Function

  • Radio Control & Intercom via Your Smart Device
    Use the RS-M500 app (for iOS™/Android™) to remotely control Smart device the IC-M510E through WLAN. Up to three smart devices can be used as a wireless microphone or remote controller in substitute for a simple microphone. Intercom function between your smart device and the radio is also available.
  • Wide Viewing Angle Colour TFT LCD
    The colour TFT LCD provides nearly a 180-degree viewing angle. The wide display has high-resolution characters and function icons. The night mode screen ensures good readability in low light conditions.
  • New Sleek Design
    The IC-M510E is slim (depth: 53.6 mm) and easy to install in your boat.
  • Simplified Navigation Function
    The Navigation function guides you to a specified waypoint or AIS target. You can assign up to 100 destinations as waypoints.
  • Provides Clear, Loud Audio
    The IC-M510E’s internal speaker enhances the received audio. The waterproof speaker provides superior sound quality with a wide frequency range for powerful, clear audio.
  • Interface BOX for NMEA 2000™ and Hailer
    The optional CT-M500 wireless interface box provides NMEA 2000™ connectivity and Two-way Hailer/PA function. The CT-M500 and the radio can be connected through WLAN. This separate interface box option allows for flexibility in positioning the unit closer to the NMEA network connection point.
  • Other Features
    • Active Noise Cancelling
    • NMEA 0183/HS connectivity, NMEA 2000™ (CT-M500 required)
    • Integrated GNSS receiver (Selectable from either internal receiver or use optional UX-241 GNSS antenna)
    • IP68 advanced waterproofing (1 m depth of water for 60 minutes)
    • Automatic Foghorn function (CT-M500 required)
    • Voice Scrambler with optional UT-112A
    • AquaQuake™ prevents audio degradation from a water-logged speaker
    • Supplied speaker-microphone, HM-205RB can be connected to the rear panel
    • External speaker connection
    • Controlled with COMMANDMIC™ HM-195 or HM-229 series
    • Supports 4-digit channels
SPECIFICATIONS
GENERAL
Frequency range TX
156.025 - 161.425

RX
156.300–161.925 MHz*3

DSC
156.525 MHz

AIS1, 2*1
161.975, 162.025 MHz
Usable channels INT, USA, ATIS*2 channels
Type of emission 16K0G3E (FM), 16K0G2B (DSC) 16K0G2B (AIS)*1
Power supply requirement 13.8 V DC (10.8–15.6 V DC)
Current drain TX 25 W output - 5.0 A
RX Max. Audio - 4.0 A (with HM-195)
Operating temperature range –20°C to +60°C; –4°F to +140°F
Antenna impedance 50 Ω
Weight (approximate) 750 g; 1.7 lb
(Not including microphone)
TRANSMITTER
Output power
(at 13.8 V DC)
25 W, 1 W
Max. frequency deviation ±5 kHz
Frequency error ±0.5 kHz
Spurious emissions Less than 0.25 μW (at 25 W)
Residual modulation More than 40 dB
Adjacent channel power More than 70 dB
RECEIVER
Sensitivity at 20 dB SINAD
–5 dBμ

DSC (1% BER)
–1 dBμ emf
Adjacent channel selectivity More than 75 dB

DSC (1% BER)
More than 73 dBμ emf
Spurious response More than 75 dB

DSC (1% BER)
More than 73 dBμ emf
Inter-modulation More than 75 dB

DSC (1% BER)
More than 68 dBμ emf
Hum and noise More than 40 dB
Audio output power
(at 10% distortion)
15 W typ. with a 4 Ω
external speaker
WIRELESS LAN
Wireless LAN Standard IEEE802.11 b/g/n
Authentication and Encryption WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES)
Channels 1 to 13 (2.4 GHz band)**
Output Power Less than 10 mW/MHz

After ordering online, you will receive an automated email confirmation containing your order details. Your order will then be confirmed within a few minutes of placing your order.

It is our policy to ensure we deliver to our customers in a timely manner. In order to achieve this we use a range of freight companies depending on the size and weight of your order. In some instances we may use a number of carriers to get your products to you. For example, chain may come by road, some electronic equipment by air.


Most orders are shipped within 2 - 5 Days

Shipping rates

Orders delivered to Australian Post Codes attract an $18.00 Flat Rate Shipping Charge* This excludes Bulky or Dangerous Goods


For Bulky Goods, Dangerous Goods and Remote areas.

If the cost to send is vastly different to our standard delivery costs, someone from our team will contact you prior to dispatch to arrange further payment or to issue a refund if you are not happy with the additional charges.

International orders will be charged at $0.00 initially and our staff will be in contact with a shipping quote. If the quote is not accepted the customer reserves the right to cancel their order and be refunded in full.

Should you have any queries or concerns about shipping, please don't hesitate to get in touch by clicking the support button on bottom right of the page.

Others Also Viewed