Part Number:

The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering type:

Part Number	Supported Drives
ACU-100	Wheel, tiller and 0.5 ltr Hydraulic
ACU-150 (New)	Type-1 Hydraulic Drive Unit
ACU-200	Type 1 Raymarine hydraulic, linear and rotary mechanical drives
ACU-300	For solenoid controlled steering systems and Raymarine constant running hydraulic pumps
ACU-400	Type 2 and 3 Raymarine hydraulic, linear, and rotary mechanical drives

Part Number	ACU-100	ACU-150	ACU-200	ACU-300	ACU-400
Nominal Power Supply	12 V		12 V or 24 V
Operating Voltage Range	10.8 V to 15.6 V dc		10.8 V to 31.2 V dc
Drive Current Output	Maximum continuous 7 A at supply voltage	Maximum continuous 12 A at supply voltage	Maximum continuous 15 A at supply voltage	Maximum continuous 5 A at supply voltage	Maximum continuous 30 A at supply voltage
Drive Clutch Output	No clutch connection	No clutch connection	Up to 2.0 A continuous, selectable between 12/24 V	No clutch connection	Up to 4 A continuous at - 12 V on 12 V systems, 24 V on 24 V systems, 12 V on 24 V systems
Connections	Rudder reference sensor Power Drive motor Ground	Rudder reference sensor Power Drive motor Ground	Rudder reference sensor Sleep switch Power Drive motor Drive clutch Ground	Rudder reference sensor Sleep switch Power Solenoid drive out/ return, Ground	Rudder reference sensor Sleep switch, Power Drive motor Drive clutch Ground Digital Input/Output
Power Consumption (standby) Main Power Supply	300 mA (12 V)		300 mA (12/24 V)
Power Consumption (standby) SeaTalkng Power Supply	No power supply to SeaTalkng		20 mA (12 V)
SeaTalkng LEN (Load Equivalency Number)	1
SeaTalkng Power Out	No power supply to SeaTalkng		3 A at 12 V (fuse protected at 3 A)
Data Connections	SeaTalkng
Installation Environment	Operating temperature: -20ºC to +55ºC (-4ºF to +131ºF) \| Storage temperature: -30ºC to +70ºC (-22ºF to +158ºF) \| Relative humidity: max 93%
Waterproof Rating	Connector panel - IPX2, Drive electronics - IPX6		Drip resistant
Weight	0.6 kg (1.32 lbs)		2.2kg (4.84 lbs)
Conformance	Europe: 2004/108/EC \| Australia and New Zealand: C-Tick, Compliance Level 2

After ordering online, you will receive an automated email confirmation containing your order details. Your order will then be confirmed within a few minutes of placing your order.

It is our policy to ensure we deliver to our customers in a timely manner. In order to achieve this we use a range of freight companies depending on the size and weight of your order. In some instances we may use a number of carriers to get your products to you. For example, chain may come by road, some electronic equipment by air.

Most orders are shipped within 2 - 5 Days

Shipping rates

Orders delivered to Australian Post Codes attract an $18.00 Flat Rate Shipping Charge* This excludes Bulky or Dangerous Goods

For Bulky Goods, Dangerous Goods and Remote areas.

If the cost to send is vastly different to our standard delivery costs, someone from our team will contact you prior to dispatch to arrange further payment or to issue a refund if you are not happy with the additional charges.

International orders will be charged at $0.00 initially and our staff will be in contact with a shipping quote. If the quote is not accepted the customer reserves the right to cancel their order and be refunded in full.

Should you have any queries or concerns about shipping, please don't hesitate to get in touch by clicking the support button on bottom right of the page.

Actuator Control Unit

Others Also Viewed

Information

About Us

Service