The 721 heavy duty selector switch provides four possible operation settings, Off, Battery 1, Both and Battery 2 giving the choice of charging a selected battery or isolating current draw to a single battery. The switch can be recess mounted in an 85mm hole or surface mounted. Screw holes 5mm roundhead. Removable rear cover insulates the rear terminals against short circuit and removable side plates provide access for heavy duty battery cables. Continuous rating: 350 Amp DC between common and B1 or B2. 500 Amps DC between common and B1 and B2. Intermittent rating: 500 Amp DC. Cranking rating: 1500 Amp DC for 10 seconds. Voltage rating: 48V DC maximum.
Terminal stud size: 3 x 10 mm. Base size : 102 x 89 mm.
Continuous rating: 350 amps DC between common and B1 or B2. 500 amps DC between common and B1 and B2.
Intermittent rating: 500 amps DC
Cranking rating: 1500 amps DC for 10 seconds
Voltage rating: 48V DC maximum
Terminal stud size: 3mm x 10mm
Base size: 102mm x 89.4mm
Be The First To Review This Product!
Help other Bias Boating users shop smarter by writing reviews for products you have purchased.