|
|
|
|
|
|
|
|
|
|
No leaks & no smells! Polypropylene with stainless hardware. Can be padlocked. Inlet suits 25mm or 38mm hose, outlets 38mm. Outlets can rotate 90°. Suits holding tanks.
|
Designed and made in New Zealand for use in marine applications above and below the waterline, our Ball Valves are IMCI and Bureau Veritas approved to ISO standard 9093-2, and are ideal for controlling inlet and outlet water requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
Allows for remote monitoring of the Monitored Ball Valve positions. The circuit can also be used as part of an engine or generator start interlock to ensure these don’t start without cooling water available. The panel switches state when the Ball Valve is in the open position.
|
Solenoid for Aquavent vented loops.
|
|
|
|
|
|
|
|
|
|
|
|
|
Moulded from a Glass Reinforced Nylon 6 composite. Easy mounting, screws directly to bulkhead or floor. Clear indication of which port is in the closed position, with lockable feature. Pressure tested to 300 psi. Includes Aquavalve Spanner for fitting hose tails, connectors, etc. (not included).
|
Anti-syphon vented loops for marine toilet hoses.
|
|
|
|
|
|
|
|
|
|
|
|
For 25mm I.D. Hose. Pick up/strainer for bilge pumps.Port rotates for vertical or side hose attachment.
|
Moulded from Glass Reinforced Polymer. IMCI certified, survey approved. Leak tested and pressure tested.
|
|
|
|
|
|
|
|
|
|
|
|
For hose I.D. 25mm (1").For hose I.D. 25mm (1").
|
White PVC body, threaded female ends.
|
|
|
|
|
|
|
|
|
|
|
|
|
Through bulkhead mount. For 19mm (3/4") I.D. hose. Maximum bulkead thickness 28mm.
|
Y piece hose fitting for inlet 25mm outlet 25mm.
|
|
|
|
|
|
|
|
|
|
|
|
Suits 13mm I.D. hose.
|
White acetal skin fittings. BSP through hull thread, steps down for hose. Excess can be cut off if not required.
|
|
|
|
|
|
|
|
|
|
|
|
Black nylon 90° elbow connectors with male BSP thread one end, hose tail the other end.
|
Joiner for Aqua valves, suits hose id 1 -1/2" 19mm BSP male thread
|
|
|
|
|
|
|
|
|
|
|
|
White acetal skin fittings. BSP through hull thread, steps down for hose. Excess can be cut off if not required.
|
Black nylon connectors with male BSP thread one end, hose tail the other end.
|
|
|
|
|
|
|
|
|
|
|
|
Moulded from a UV stabilised Glass Reinforced Nylon 6 Polymer. IMCI certified, survey approved. 1/2" BSP
|
Suits 13mm I.D. hose.
|
|
|
