FREE SHIPPING on Orders of $50 or More! (click for details)
10% discount on orders over $1000 (exclusions apply, click for details)
Browse By Category

  Home > Anchoring & Docking > Horizontal Anchor Winches >

Maxwell Horizonal Anchor Winches - HRC 10 Series

Maxwell HRC 10 Series Horizonal Anchor Winches


 
bulky 
Fully automatic horizontal windlass designed to effortlessly retrieve and deploy short link chain as well as rope. Aesthetically pleasing hard anodised marine alloy case with composite motor cover provides a watertight design that allows for easy routine maintenance. The rope/chain gypsy is balanced with a rope capstan for secondary rope retrieval. Chain pipe supplied. Cone type clutch/brake mechanism permits manual free fall. Simple deck mounting with no under deck parts.


Item# Item Name Our Price Qty Add
3096X HRC 10-8 Rope/Chain Anchor Winch
$2,099.00
(Out of Stock)
3097X HRC 10-10 Rope/Chain Anchor Winch
$2,149.00
(Out of Stock)
Check the items you wish to purchase, then click


Features:
  • The all new HRC10 fully automatic horizontal windlass series is designed to effortlessly retrieve and deploy 8mm (5/16”) and 10mm (3/8”) short link chain and 14mm (9/16”) and 16mm (5/8”) three strand or 8-brait (plait) rope.
  • The aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck.
  • The two part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section.
  • This two piece watertight case allows for quick and easy, on-deck, routine maintenance.
  • Simple bolt down installation ensures effortless and rapid on-deck installation and set up.
  • The stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain).
  • The new and revolutionary patented Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Series.
  • The unique Maxwell wrap around™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs.
  • The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system.
  • The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker.
  • Cone type clutch/brake mechanism permits manual, free fall™ anchoring and emergency crank recovery of the rode and anchor if required.
  • The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel.




Technical Specs:

  • ModelHRC10-8HRC10-10
    Maximum Pull700kg
    1540lbs
    850kg
    1870lbs
    Static Hold1500kg
    3300lbs
    1500kg
    3300lbs
    Chain Short Link8mm
    5/16"
    10mm
    3/8"
    Rope Size (Nylon)*
    (3 strand or 8 plait)**
    14mm-16mm

    5/8"
    16mm

    5/8"
    Chain Speed24m/min
    79ft/min
    24m/min
    79ft/min
    Rope Speed20m/min
    66ft/min
    20m/min
    66ft/min
    Power Supply (DC)12V or 24V
    12V or 24V
    Motor Power1000W
    1200W
    Net Weight (Electric)19kg
    42lbs
    20kg
    44lbs
    Hydraulic pressure138bar
    2000psi
    138bar
    2000psi
    Hydraulic flow20l/min
    5.3US gal/min
    20l/min
    5.3US gal/min
    Net weight (Hyd)13kg
    28 1/2 lbs
    13 kg
    28 1/2 lbs





Extended Information:
Important: Maxwell windlasses must be used in conjunction with a chain stopper and/or alternative snubbing device to take the load off the windlass while laying at anchor. The chain stopper and alternative snubbing system should also be used to secure the anchor in the fully raised position while under way.


Share your knowledge of this product with other customers... Be the first to write a review

Boating & RV acquires Bias Boating Stores

IMPORTANT INFORMATION, PLEASE READ.

December 14, 2016 - For those of you who don't know Boating & RV acquired three of the Bias Boating stores back in 2014 to expand on our original store located in Capalaba, which include the Slacks Creek, Tingalpa and Townsville stores. Our brand has been growing better & stronger everyday and we have helped to serve thousands of happy customers with all of their boating, sailing, trailer & caravan needs.

Boating & RV would love to have you as a customer! We are offering $10 OFF* any order through our website! To redeem this offer simply use the coupon code below and enter it on the cart or checkout pages of www.boatingandrv.com.au

coupon code: BOAT_10


To shop online click here!

* coupon is only valid online. Expires 1/04/17 Please note: Boating & RV is a separate company that is not affiliated with any former Bias Boating operations, as such any outstanding Bias Boating orders or vouchers cannot be redeemed, returned or refunded through Boating & RV.